Digital battery

Car batteries are mostly lead-acid batteries, not only can supply large currents, but also the lowest cost of the cell mechanism of chemical reaction. Lead acid batteries can withstand a long period of routine maintenance load, it will often be the traditional “floating” (floating) Food found in its tracks, like the system of uninterruptible power supply or lighting of urgency. Moreover, gaps in the lead-acid VGP-BPS5 VGP-BPS9A battery is the most important weight unit or per unit volume of the storage density of the lowest energy. Large commercial applications, the chemistry of the battery the next step should be to lithium-polymer reaction, it is an attractive technology because it allows the battery became a sheet of flexible polymer, sandwiched between the cathode and anode materials between. This function opens the door to an application, companies will eventually be made into any shape of the battery; In addition, the management point circuits to the battery, the vast majority of the nature of the polymer lithium and lithium-ion chemistry are the same. Charge and discharge charge and discharge of the battery chemistry will affect mainly manifested in the capacity of the storage battery, the general is “amp hours” to represent the carrying capacity battery ( Lithium-ion batteries used most often are “Wh” is because the units of the battery voltage lithium-ion battery is higher, making the importance of the ability of energy storage capacity that Current storage.) recharging the battery, it is still the battery voltage, current and temperature to set certain conditions to be protected, if the acceleration with the load, then the battery status will be faster and force these protected conditions, leading to it can accept power, but declined. Similarly, if the rate of discharge of the battery faster then the voltage drop exceeds the rate of strengthening capacity to reduce the rate, causing the battery to the actual working hours than the prescribed amount of time discharge is shorter. Dell Inspiron 1501 battery  Dell Inspiron 1520 battery Thus, compared to a slower rate discharge applications, applications of high discharge rate (such as power tools) would require an element of compensation totally different to fully compensate for this phenomenon. As the battery storage of energy and energy supply are the loading rate and rate functions of discharge, therefore, may be “C” to represent these rates, it is operated current size (in amps) divided by enhancing the total capacity (ampere-hours) results; For example, if the rejection rate of 1C, said that the time will be able to save the battery power exhausted. The time required for charging the original C rates that much longer, because the efficiency of the battery may reach 100 percent, but will continue with different types of change batteries, nickel hydride batteries metal of 80% lithium ion rechargeable alkaline batteries at 100% or more. Effects of temperature on the temperature of the battery if it is more a difference of 25 ℃, then build the capacity of batteries, carrying capacity, shelf life and the life cycle would be reduced more. In general, the battery discharge rate increases with increasing temperature, approximately every 10 ℃ will be doubled. In addition to nickel-cadmium batteries (which would be responsible for a chemical reaction is an endothermic reaction), and other battery charging, the temperature will rise if use of over-pricing method, then the rate of Warmer temperatures will accelerate. Among the nickel-cadmium batteries are generally the use of dT / dt to the suspension conditions of fast charge, which represents the temperature from the rate of change. As the temperature increase of the battery when the electrolyte resistance is reduced, then so do not check the F3172A PB995A battery charging algorithm for temperature, then decrease as the electrolyte resistance, the load current will increase , causing the battery temperature continues to rise and form a path of positive feedback from danger, this situation called “thermal runaway” (thermal runaway). Stability charger battery charging (Charger net) to upload the most conservative does a “stability” (trickle) charging phase, as long as the battery and charger connected, it will be specified by the manufacturers ’standard’ rate of loading (usually around C/10) continue to charge the battery. The charger should not be the direction he will not use the battery monitor or timer to stop the charge, so that the least cost. Rapid Charger (quick charger) rate Fast charge of about C / C or 3 / 4, the battery charging time can be shortened to 4 or 5 hours. Quick Charger is generally controlled by a timer, time to stop charging n ‘ is not necessary to use other battery monitor. While this technique can reduce the cost of the charger, but the manufacturer must take into account, so that the battery is full power in the circumstances, able to withstand complete cycle of over-pricing, so if the user does not care power of a full battery recharging, the battery will not cause damage. Quick charge battery structure slightly different from that of normal cells, their internal structure will be made relatively large so as to absorb the excess gas produced during charging. High-speed charger (quick charger) to speed the loading rate is usually 1C or 2C, but some manufacturers have introduced a number of rechargeable batteries at rates up to 4C. As the case of over-charge the batteries may cause great damage, so you must use a “smart” (smart) charger, which must monitor the state battery, while providing a very stringent “condition of charge termination. Smart charger included in the circuits involved, in addition to controlling the charging process is responsible to provide three functions: the battery state regulation, charge the PA3395U-1BRS PA3399U-1BAS battery before the start of the identification and ensure that the process of charging by the security set. Battery state regulation when the battery used for a period of time, the reaction is the formation of some crystals on the surface will impede the conduct of prosecution, some of crystallization is that the method of real contact would be removed. However, by electrical effects, there are no reliable way to eliminate these crystals can be used electrical methods. If the user so that the battery is properly managed to avoid an overload for scenarios (and in some chemical mechanism are also included in the excessive discharge) and compared the abuse of the battery, the former deputy -product of the cumulative rate of secondary reactions will be relatively slow, and the work temperature is relatively low, which does not only extend the life cycle of the battery, but also the high capacity storage battery maintain a longer period of time. To-nickel cadmium, with the greatest capacity, there is a very useful electric mode of operation. Nickel-cadmium batteries will be “memory effect” is when the current through the nickel cadmium batteries have been charged in the storage area, they will change the crystalline structure of the phase state of the region. In this new phase state, in terms of stored energy or release energy during the reaction, and receive a lower voltage. Nickel-cadmium batteries to power if the first version, you can reverse-charge region of chemical reaction, and would return to the normal crystalline structure, it can eliminate the memory effect of battery. For nickel-cadmium batteries, the charge before the action of discharge is a useful step in the charge before the adjustment. Identification of the cell identification of the battery to determine battery state of normal, acceptable load. IBM ThinkPad T43 battery  IBM ThinkPad T60 battery

We can open the battery and short circuit test: In the open circuit test, plus a voltage across the battery, then adjust the voltage for the battery current minimum test in short-circuit then let the battery with a current, then adjust the size of this current for the battery voltage minimum. In general, during the test imposed by the voltage or current does not exceed half the load value at high speed. On the other hand, manufacturers specify a temperature range of pricing, the action of load can be performed in this temperature range. While manufacturers of integrated battery thermistor while before driving at high speed loading, you may want to check the temperature limits. In addition, if the battery has been over-charging, it should not re-charge, if a battery has published a lot of power, and not appropriate to pay a higher rate, it should not re-high speed loading . Identification of the failure of the battery there are several approaches to exclude short-circuit or open circuit failure, the battery replacement is the only way. If problems with temperature or voltage, then the shipper May BE access to “break load” (loading) state, waiting for conditions to return the battery related to the extent permitted by. If the battery voltage is too low, then the adjustment phase of the battery, charger generally adopt stable pricing, which allows the voltage of backup battery charging high speed allowed by the minimum voltage. A complete charging solution that can contain a maximum of four parts: the algorithm for high speed broadband loading loading pricing conditions for the completion of the suspension (top-off) algorithm to conduct the interview A1012 A1060 battery acid charging algorithm in the world of high speed phase load, also known as “many leaders” (bulk load) phase, used for fast charging the battery; Whether reserve running the battery at least? High-speed loading phase of what should be in time to stop? These are the conditions of the suspension load at high speed to select the appropriate basis for judging. The nickel - hydride batteries, metal, when the cycle of high load velocity due to temperature or voltage limit must be stopped, usually there will be 5%-20% of electricity has not yet completed, the charger will continue to use a loading rate of the smaller “charging” phase complete (high-speed loading rate of 1 / 5- 1 / 8. Ni-MH battery charging is complete. In general, this charge will be for a period of time fixed for completion. Then it is loaded by a maintenance phase or a stage of “floating” (float phase) to compensate for battery self-discharge rate, so that the battery will maintain the condition of full power.

BYD F3DM launch the fastest dual mode electric vehicles present, except for a very small trial batches in Shenzhen, the market is still difficult to find their mark. There are various indications that the new Energy Line racing car technology, electric vehicles, China has become the new energy vehicle development, the main direction.

Electric vehicles in emerging strategic industries

Last Tuesday, workers issued by the Ministry of the fifth letter of energy conservation and new projects to demonstrate energy vehicles to promote the use of the VGP-BPS10 repertoire list of recommended models. In the list directory recommended, Sunwin Shanghai, Jiangsu, often long and Liuzhou Wuling three cases of three electric vehicles, so impressive.

In fact, since the first catalog of first car lots issued 193 energy saving projects and new demonstration vehicle to promote the energy use of models has been recommended to date, the Ministry of the letter published in five batches 46, all kinds of new energy vehicles, electric vehicles accounted for 28 models, not only more than all other technologies combined routes of new energy vehicles, but manufacturers are involved in Dongfeng, Chang’an, Chery BYD, Hafei, almost 20.

In addition, electric vehicles, and more recently “promoted” as a “new energy, energy saving environmental protection, electric cars, new materials, new medicines, bio-farming and industries of the information, “the seven new strategic industries” Seven “and one, all types of sufficient showing that countries have electric cars rather than VGP-BPS9/S technical in line with other new energy vehicles, like the future of strategic industries the country.

Previously, over a month, U.S. President Barack Obama during his visit, the electric car is also included in the release of the two heads of state signed the “Sino-US Joint Statement.”

The manufacturers of electric cars boom lifting force Qi

Policies to promote electric cars face a “wind” blowing hit, but at the enterprise level, electric cars feeding fat, “Thunder disaster” also rings frequently.

Last Thursday, the Shanghai Automotive and the United States A 123 Systems Inc. jointly announced that both sides of the shares in accordance with 51:49 ratio, the establishment of Shanghai Czech Republic, New Power Battery Systems Co. , Ltd. to jointly develop, manufacture and sale system vehicle battery power. As battery technology lithium iron phosphate in a corporation listed on NASDAQ in the foreground, A 123 now has a world-renowned large scale lithium-ion battery systems and batteries capacity. The industry generally believe that Shanghai Automotive and the A 123 of the cooperation will help achieve a new energy vehicles, Shanghai Automotive Industry Development Strategy and the key components in the battery system on the industrial development of the formation of ‘breakthrough.

At the same time, the reporter learned Hafei Motor, the company produced high-speed electric cars has been Saibao “Zheng Zhunsheng ‘official entry into the national high-speed production of electric vehicles directory. Hafei vehicle related sources, which can be vehicles of industrial production will soon be the first to enter the scope of government procurement in China.

In addition, the annual production capacity of pure electric vehicles in the 10000 Air Car power project was installed in Zhengzhou Institute of Aeronautical port. The project with Anhui, Chongqing, Henan, Guizhou and other places a number of car manufacturers have signed a long term cooperation agreement framework, and on this basis, the domestic VGP-BPS9A/B automakers and large-scale cooperation production of pure electric vehicles, a project is completed in 2012, the project can produce a pure electric car 10000.

Combining the previous mode double F3D M BYD E6 Electric Car, electric cars Chery S18, Beiqi “Beijing” BE701 mark Pure electric cars coming and Shanghai Automotive buses and electric cars, electric vehicles off the Unit, has been a marked increase in coverage other technical line of new energy vehicles. Fearing that the plane manufacturers in the optical current electric vehicles in terms of production and sales, the future of new energy vehicles will account for more than half.

Electric Vehicles Take-Sheung sandaokan “off”

However, despite the heat wave of electric vehicles, but the country does not dare to promise a company at a given time, will definitely launch its own electric vehicles. F3D M BYD dual-mode electric vehicles, announced the end of this year on the market, but outside of a very small trial batches in Shenzhen, the market is difficult to find the trail; Chery S18 also complained of be available this year, but understanding, the car during the year’s announcement was completely “Moxi”! Chery and Changan Electric Vehicle R & D-related person said that currently limit the development of the domestic electric car, there are three main factors: one is produced electric vehicle itself, one is its cost, it is one is its use of infrastructure.

It is understood that the basic technology of electric vehicles include four, namely, sony VGP-BPS2 battery technology, motor and control technology, vehicle technology and techniques of electrical energy management. In China, despite BYD, SAIC, Chery, Chang’an and so a few years ago began research on electric vehicles and development, and each has made great progress in the fields. However, the current situation, several major companies developing electric cars are still in some respects, there are advantages but there are other aspects of the situation in the short board. BYD battery technologies as well, but the technology of electric vehicles, but not obvious, Shanghai motor vehicle technology and energy management, it has been more advantages, but its battery for another great challenge.

The cost of electric vehicles from the point of view, as the generation of new products, its sales volume after industrialization can not be expected, many manufacturers have expressed their stakeholders, the market for electric cars for at least same platform as the price of traditional gasoline engine of the car 50% higher over. In fact, BYD F3D M nearly 15 million market value point of view, the least expensive compared to F3, a full price of more than 9 million yuan, this situation will undoubtedly limit the speed of vehicles electric market. In China, despite Chongqing, Shanghai, Shenzhen, Guangzhou and Hangzhou and other cities have increased to subsidize the use of new energy vehicles, but the VGP-BPS9A specific pairs of electric vehicles on how the subsidies are not an explicit statement to date.

Infrastructure for the use of electric vehicles is another cost. Based on the characteristics of electric vehicles, how to ensure the load quickly and easily to maintain the range of travel of electric vehicles, electric vehicles will obviously become a limiting factor in the development of a key. Now, look you require vehicle electrical training environments has a perfect network of charging stations, automakers and utilities rely solely on efforts are clearly inadequate. Even if he had confidence in the future for electric cars Nissan CEO Luo Card If Geen also pointed out that “electric cars have a bright future, but if the government does not join the perfect electric car charging stations, such as ranks of the construction of electricity infrastructure Automotive future will be more trouble!

Camera battery digital battery commonly used in lithium-ion batteries, batteries nickel hydrogen, nickel-chromium batteries, alkaline batteries, etc … Most digital cameras use batteries AA Ni-MH Laptop battery to do.

1, Ni-MH battery features:

Nickel-metal hydride batteries (NIMH) is one of modern electronics, the battery the most widely used, a large green with a unique ability, the discharge characteristics of a smooth, high universality, heat a little and so on. The disadvantage is that large, self-weight important.

2, Ni-MH to self:

Ni-MH battery nominal voltage of 1.2 V, in the case of sufficient power to 1.35 V, with Class AA regular alkaline battery are similar, essentially universal, Ni-discharge characteristics of MH battery are very good, very smooth discharge curve, consumption of electricity is about to end, the voltage drops abruptly, which is close to the nickel chromium batteries, but not as good as nickel discharge current instantly piles of chromium. In addition, nickel-metal hydride batteries used mercury-free design, which is of great importance to environmental protection.

3, Ni-MH battery structure:

AA Ni-MH VGP-BPS9 battery with the same form as ordinary AA batteries. With nickel chromium batteries, like nickel-metal hydride batteries used reversible chemical reaction to reach the charge and discharge process. Therefore, in the process of loading and unloading of the battery will produce a large number of gas inside the battery internal pressure is relatively high, therefore, nickel-hydride batteries are used in metal in the design of the exhaust vent to prevent excessive internal pressure caused by an explosion. Currently, we have been in contact with GP series battery, do not see how the tube, because the battery is installed on top of a circular plastic film used to prevent blockages and prevent the positive vent cap Hull with the negative short-circuit.

4, the battery memory effect:

The effect of so-called memory refers to the battery charging and discharging process, the chemical composition of the internal battery is determined in a region can not continue to produce a chemical reaction phenomenon. With an example: When the battery is fully charged, it can be a continuous stream of 60 minutes. Now we’ll use this section to conduct the VGP-BPS13/S battery of this electric discharge, discharge to 30 minutes to stop, and then this part of the battery to charge a good 30 minutes after powering up continue to perform, are not completely discharged each time, after N repeated operations The batteries have a memory effect, the process used in the future, when the discharge of the battery after 30 minutes, more output current, which is the battery capacity of this section reduced by half. Of course, we now use nickel-metal hydride batteries in general, this phenomenon do not occur, because the chemical composition of nickel-hydride batteries and nickel metal battery chromium different. Ni-Cr memory effect the battery is very serious.

5, the battery:

Is slightly different and the Ni-Cr, Ni-Cr battery is a constant pulse of current to recharge, while the nickel-hydride batteries in metal using a wavelet, the relatively smooth current to recharge. In emergencies, the two shippers are interoperable. Charge should be to control the charging current appropriate, how to estimate the current load properly done? This depends on the battery capacity to decide. In general, civil standard battery 16 hours to charge, charge current is: VGP-BPS9/B battery capacity / 10, units mA. There are fast charge, fast charge current standard of 2.5 ~ 5 times, there is no uniform standard. Our selection of chargers, they should try using the standard charger, how to determine the load current chargers do? When we buy a magazine, looking for a JS or have a multimeter multimeter, charger plug supply, multimeter affected DC 500mA stall, desktop charger red pen and then the film cathode of the battery, pen blackboard, and negative films, which can be approached by reading multimeter to determine feeder load current, because the internal resistance of the battery is low, so close to the actual load meter reading in progress. You can also use a number of self-feeder, the advantage of such a charger stops automatically loads the son not to worry people. There is also a charger with a trickle charge is a function, which is an electric charge in good condition, the charger automatically uses less than 10 times the current standard of care for small current continues to maintain the battery charge which is to maintain the battery capacity and prolong the life of the battery well. Al-Sahaf GP has recommended that such a combination of pricing Po charger recommended. In addition, we should try to avoid the use of fast-charge, fast charge, the chemical reaction inside of the battery is very severe, the temperature is high, which will accelerate the aging of the battery and shorten battery life. However, when you exit or emergency charger fast, but very useful oh.

6, the discharge of the battery:

Were fed the exercise, and consumption. The VGP-BPS9A/B battery is the same charge of electricity, we must pay. In addition to the normal discharge in outdoor use, why do we still run the battery to discharge it? Please come listen to me 11. When our camera due to run out of batteries needed to recharge the battery when we find that these batteries run out in other electrical devices can continue to use? In addition, for each cell the same as that used in the electrical length of time-varying? This indicates a problem is the capacity of these batteries is inconsistent. Why is there such a situation? The reason is: we use our appliances, most are two or more cells of the battery is to link the battery packs in accordance with Ohm’s law, one can see that throughout the series circuit current is equal, the internal resistance of each cell can not be fully compatible with (even at the same time, the same production line for batteries), then the voltage drop at both ends of each section and the power consumption of battery is not completely the same. This has led to the battery in the same imbalance in the relationship between the circuit, eventually leading to one or more batteries in the long “enough to eat, could not stop,” the State until that it is damaged. The reason we display on the battery discharge, while abhorrent to eliminate memory effect, on the other, so that each section of the battery as much as possible to reach equilibrium, with full, finished with release, work synchronously. So how can we discharge? Please keep in mind this truth: “discharge, we must separate each section of the discharge of the VGP-BPS9A battery!” Otherwise, cons-productive, not as good as letting go. Discharge resistor or small bulbs can be purely resistive components such as resistance controlled discharge at 1.5 to 4 ohms, slow discharge big, too small to heat the battery. In practice, it is recommended to use three 3.8V parallel beads the electric discharge lamp, a resistance of 1.7 ohms at this time, discharge current of 700mA, less than 10 minutes, the lights went on discharge is completed, it is intuitive. You can also use the method of resistance + discharge bulb, Shi measure the resistance controlled at between 1.5 and 4 ohms on it. We can be converted to produce low discharge of the battery charger of the quality we want is to buy charger less (about 5 million euros) for a better selection of housing and support this amendment, then remove the internal battery charger for all electronic components, retaining only the circuit board and watching the battery then welded to both ends of each VGP-BPS8A battery clip with our light bulbs or resistance and so on, so we put on the equipment yourself better.

7, battery care:

In the process of using the battery, following the release of “full full” principle, do not eat too full, do not be too tired. Beware of the battery shorted on, this is very dangerous. Do not tear the skin in plastic drums, as this may easily lead to a short circuit, this one is very dangerous. Do not disassemble the battery or the battery in fire. A long time does not use the battery must be filled with storage, the reopening of the first discharge, then charge to use. Try to match the use. If we could do the above, we will always keep the battery in good condition, the best services for the majority of DX.

8, the battery of purchase:

Buy batteries, in addition to a pair of piercing eyes, we must also note the following points: ① Select JS confidence, at least the assurance; ② need to choose according to their abilities, some of the best choices for large capacity; ③ Choose well known brand battery;

With the growing popularity of laptops, notebooks on all aspects of the problems appeared in various media on the largest number of arguments for the proper use of laptop batteries, notebook batteries of certain items that the use of personal experience, while others claim expert advice (which we often do these sales), all sorts of stories, the number argument.

The author is also a regular laptop user, but not an expert, but with several years experience in the use of notebooks, the author through a friend recruited dozens of university students using a computer mobile, so they talk about their experiences on the use of cell phones, coupled with her a little more experience, summed up what is available to the

We as a reference, hoping to give everyone a little help.

Argument 1: activation of a new VGP-BPS8 battery

View 1: Before you buy a new battery inside, there will be more than 3% of electricity, more than the battery inside the power exhausted, to rest, then reuse a load external power. The charging time must exceed 12 hours, three times in order to activate the battery.

View 2: No, the battery for 10 hours of rechargeable battery to activate the activity of the normal load, the method of release for activation.

Survey Results: The authors studied 24 students from colleges and laptop users, 18 is the second view, and the manner and does not charge the battery for future use can hurt, of course, exclude damage to the natural elements. The author himself is also the case when the normal use of a new battery for up to two hours and a half, now two years, the state of the battery is still good, still can reach more than two hours, so I fear I have been satisfied?

the proposed method: I agree with the second view, based on available information indicates that the activation of cell work should be completed at the factory and a plant cell battery with a capacity of some natural wear to avoid damaging the VGP-BPS8A battery. The activation of the battery must be in no case to protect the circuit can be with its own circuit of lithium-circuit protection, the purpose of this part of the circuit is to prevent the battery charge and excessive discharge usually filled after charging the battery when the indicator light off, the battery can be recharged in electricity, and then you plug the power plug to recharge the battery in the face of what? Available from the battery can be seen on the battery status of any charges, another teaches you offer a simple way to be able to determine whether there during the battery charging, battery charge , where the phenomenon has a fever, when the battery is full after one hour (power plug does not fire), you’ll try the battery to see if the battery is still warm, not hot? The result is undoubtedly the cold, because the battery is not charging and discharging state is certainly not the heat. Manufacturers of portable computers in the factory will offer a new battery for more than 10 hours. This sentence may be generated for some users the wrong point of view first, the author of this opinion, should be taken into account that some notebook manufacturers a new user in the battery again when n is not fully capture the skills, just so they can charge directly for 10 hours, which should be the business opportunity.

Secondly, the argument two: whether the AC disconnects the VGP-BPS8B battery?

View 1: Use an external power supply when the battery removed.

View 2: Use an external power supply is not necessary to remove the battery.

Survey Results: Most students in the use of an external power source, the battery removed, only a few use an external power supply when the battery is placed above, the few brands are used by students in several global brands.

the proposed method: In fact, if the battery is removed, the conflict has focused on the use of an external power supply when the battery is in charge of question

. We must know that the number of loading and unloading of the battery life is directly related to the lithium-General established the number of loading and unloading are fixed number of charge cycles only 400-600 times, especially products modified, but 800 times, once for each rechargeable batteries a step toward retirement. The first argument is simply because they are afraid to use power, the battery will be conducted on the above charge, not only to increase the number of charge cycles, but also cause an overload. The second view is that the battery is full power on the computer using an external power supply will not recharge. In fact, both views have their right side, but also in the wrong place. Because only the views expressed by individuals is not very full after my investigation, many laptop manufacturers taking into account the vulnerability of the stack, and the proceeds added to technology protection VGP-BPS9 battery, and therefore different laptop batteries corresponding brand protection technology pricing is different, as some large companies are doing very well in this area, such as IBM, Hewlett-Packard, Toshiba, Compaq, etc.. One of the most thoughtful consideration is that IBM, the IBM laptop can detect the location of the discharge of the battery, laptop battery ThinkPad only less than 95% of the time will reload automatically. This can play a very good protective effect on the battery, held today and many other manufacturers followed. So, as drums, you do not have time to use pull down, because only when the capacity is less than 95% of the time, he is responsible. But even so, if you are prolonged use of computers, or will be removed from the battery to compare well, because the long duration of heat generated when the laptop battery will cause some damage. However, some other “little brand” batteries, may not benefit from such treatment because he was not within the protection technology of the battery. I like to use a certain brand of computers phones if the battery is fully charged to the above, when you use an external power supply has been confirmed at the first charge on electricity, because the storage battery, will wear, can not reach 100 %, while not 100% as long as the power supply connected to the load. Each access to an external power supply is equivalent to recharge the battery once, although only a small charge will be yet. It therefore proposes that we use when the machine according to their own situation, look at the manual laptop, choose whether you want to use an external power supply when the VGP-BPS9A battery removed.

Thirdly, the argument 3: how to load correctly?

View 1: The battery should always be all exhausted, so that consumption of portable computers to automatically stop and reload every time must be filled.

View 2: When the battery is very deliberately not pay attention and use it when I wanted to pay extra.

Survey Results: The majority of students said that, needless to the view first, as used in automatic standby mode, then load, but also as the second point of view, it is free. Are generally used when the battery must be recharged when the computer has prompted further charge, of course, calls per hour may be set, the default is 3%.

the proposed method: In this paper, the proposed method with the majority of students is the same. In fact, regardless of nickel batteries using a laptop-metal hydride, lithium batteries are such a memory effect, and nickel-hydride batteries with metal memory effect is very obvious, but it will effect memory lithium, but his memory effect smaller than nickel-metal hydride Bale. There is no memory effect on lithium-that only exaggerated and irresponsible to do business in advertising, is totally misleading. Well, since the VGP-BPS9A/B battery has a memory effect, it should be noted at the load point, as far as possible, then run out of charge, but you do not need to say deliberately use the computer to s ’stop automatically, so that although there is no harm in using them (because the laptop battery has a charge-discharge secure a laptop automatically shut down has not yet reached the standard battery protection discharge), but you do not feel tired? In fact, less than 3% of the burden in this way is very good, memories will certainly effect compared to natural wear, there should be nothing. The second count on the charge to view the author is totally disagree and we have already said, if the laptop battery nickel metal hydride, lithium, which has a memory effect, if in this way, then the battery life will be shortened.