Digital battery

Introduced the use of nickel-metal hydride battery of new products also accelerated the acquisition of all the heat, of course, it is unique “temperament” as the energy density, the number of charge cycles and more details ‘memory effect is small, non-toxic metals such as cadmium, mercury are also a number of advantages achievement of nickel-metal hydride Laptop battery position in the bull market.

 

With all the hands in nickel-metal hydride batteries steadily increasing number of scientific leap in the use and maintenance has gradually at the sight of attention. As we all know, the brand Ni-MH IBM ThinkPad R51 battery life can be charged according to the official request that 500-1000 times, but this is actually a good value, and often do not respond to such a life. But as a sensible use of chargers, more in depth understanding of nickel-hydride batteries, metal, we have left to do, “longevity”.

 

1. Under normal circumstances, the new nickel-metal hydride batteries contain a small amount of electricity we buy on driving charge and then reuse. However, if time battery plant is quite short, electricity is sufficient to recommend use first and then reload.

 

2. The new nickel-metal hydride batteries to buy a general charge to go through 3-4 times and use of, performance can play in the best condition, many of my friends for the first time, the prosecution encountered a small problem, for example, the first charge did not imagine the number of PP film so many? In the 3-4 times after charging and the use of all be resolved.

 

3. Although nickel-metal hydride Dell Latitude D820 battery memory effect is small, as much as possible is recommended after each use finished loading and is full of time, do not charge you would use for one count and then. Only longevity, “Oh, the important point.

 

4. The battery charging, the charger should pay attention to the heat surrounding the deliberate use of what wind there too is no need for fans, but noted that the shipper should not put too much debris around. Ordinary users the process of using the battery, the battery is often not a dedicated storage bag; users to replace the battery, will acquire the habit of easy storage battery, regardless of where the place is clean and moist . The consequence is that the battery they get dirty easily, easy-to-metal contact, such as keys, etc. contact, easy to moisture, and it is the enemy of batteries. Recommendation: Users should set up a special cell to place points and keep the battery clean. To avoid problems such as loss of electricity to keep the Dell KD186 battery and contact points of the battery to both ends of the inner lid clean, if necessary, use a soft, clean and dry pasture.

 

5. A long time did not have time, remember to remove the battery from the storage battery, placed under dry conditions recommended brand of battery in the box to prevent short-circuit the battery.

 

6. A long time without nickel-hydride batteries in the metal shop a few months later, the battery naturally in hibernation “state”, the battery life considerably reduced. If Ni-MH battery has been placed for a very long time, I suggest you begin with the slow charge is appropriate to impose. For another important issue at stake here: for Ni-MH HSTNN-LB31 battery, the battery must be completely discharged, then save, store, or online? Both points of view very different from what it should be used? Many people think that we should adopt the first, but I thought that to save the battery charge is reasonable. Because: According to tests, Ni-MH battery to save the best conditions to save about 80% charged. Because the nickel-metal hydride batteries self-discharge rate is high (10% -15% per month or almost), if the battery is completely discharged, then save it for a long time not to use the ‘battery-discharge phenomenon will discharge excessive battery, may damage the battery. Do not believe? So you think to buy a new nickel-metal hydride rechargeable battery is not all there is electricity, which is the reason. Recommendation: Apart from correcting the wrong point of view, maintenance of the battery to start in the right direction, otherwise it will backfire.

 

7. There are many messages from friends post questioned how to meet Ni-MH? After investigation, after many specialists battery reach a unanimous conclusion to remind friends. Do not nickel hydride metal discharge the sony VGP-BPS2 battery, excessive discharge may cause the failure of pricing to harm is much greater than Ni-MH battery memory effect of the battery itself!

 

8. Auto multimeter test battery is full or not. Ni-MH batteries in general charge before the voltage is below 1.2V, filled with normal voltage is 1.4 V or later. We as a judge, also very easy to judge the condition of the battery.

 

9. Chargers can be divided into fast charge and trickle charge. Low load current is small, typically around 200 mA, such as our common load current is about 160mA. His long-time charge, 1800mAh Ni-MH toshiba PA3399U-1BAS battery should be 16 hours or more. Even if I was a little slow, but the charge would be filled very full, and do not hurt the battery. Fast charge current is usually in the more than 400mA, charging time significantly reducing the number of .3 to 4 hours can manage that, but also won the affection of all. Several types of fast charge, prices vary. Therefore, we often have questions about the same load faster, why the price is a big gap in it? Good charger in particular is a good fast charge brought against over-charging protection function, for example, we have a common understanding Acura Panasonic BQ 390 charger has been particularly noteworthy in this regard, excellent software chip capacity charge the battery while it also brought evil upon the battery, quick charger minimized.

 

10. Conflict: trickle charge does not hurt the battery charging time is too long, however; fast charge can save time, but there is damage to the battery, even if the surface is the world need the best degree Panasonic BQ390 charger only very good harm reduction, but not totally avoided. Contradiction can be resolved is to buy a quick charge and a trickle charge. Quick charge with the load for some time, for example, 5.10 times after the transition to slow Chong Chongdian once or twice. This apple A1078 battery performance to return to a higher state.

 

11. The batteries are commonly used battery, four or six, and this time, to maintain the balance of each cell is very important, otherwise, due to a battery problem has affected the work of the entire battery. First, the battery capacity and ensure consistency, the best place to buy the same brand of the same type of battery time. Then the internal battery power to maintain consistency, simply, is that the electric battery is either full or empty. If there are more groups in the composition of the battery, you can try to “select” look. Means that the specific capacity, similar to the battery voltage and other parameters in one set of battery cells in series, due to poor conditions, under normal circumstances let endpoint measures after the tension and son of red blood on it.

 

12. Speaking on the last charge and discharge.

 

Top of the range of NI-MH Aspire 3000 battery charger with battery test delta-V to determine if the battery is full. When the curve of discharge voltage of the battery and is somewhat similar to the beginning of a more rapid rise, followed by rising slowly until the stuffing is good, the tension began to decline rapidly, but decrease in not very large. Before commonly used nickel, cadmium batteries are also similar, but drop the speed and the amplitude was higher than the NI-MH. Most chargers on the market type (less expensive) is often used is the value of the charge pressure, such as the elderly GP 1.4V Rechargeable value Po is the pressure that is precipitated at 1.4V when the battery voltage, because there is no difference, and charge on the end. Such a result is often that the battery can not be bridged, particularly in some older battery due to increased internal resistance, the real addition to the low voltage battery. And this charger currents tend to be smaller, often charging more than 10 hours. Using Delta-V cutoff automatic charger, since it can precisely control the load time, use may be more reliable high-current load. High charging current nickel-metal hydride battery for damage and do not want to imagine the contrary, the use of DC current, but also require high current load. The first is a matter of time, not talk. Then, Ni-MH battery has a characteristic, that is, the higher your current rate, it can release the most common, and now is tigre DC electric current is not small, so relatively speaking the use of relatively large load current is a choice, you can clean the toshiba PA3191U-4BRS battery is added. General 5 charge current should not exceed 1.5 C, C to the battery capacity is 1000MAH batteries, not more than 1.5A. I usually carried with the load 0.5C (my charger with adjustable current). Discharge zone, in normal circumstances, DC Black can be a burden on Na Qu, NI-MH little memory effect. However, in a period of time after use, and the balance of the cell to activate the battery when the battery discharge and control the termination voltage. NI-MH battery termination voltage of 0.9 V, the discharge time careful not to over-discharge, the 0.9V for each battery when it may stop the rejection file. NI-MH battery is not powerful nickel-cadmium batteries, the overcharge and over discharge and is more sensitive to high temperatures. Charge and discharge temperature. In general, do not let the hp F4809A battery temperature exceeds 45 degrees. When the battery is fully charged, the battery will be hot, filled with large current when the temperature is 42 degrees and not more than 45 degrees, otherwise life will soon be reduced, the battery internal resistance will increase. Also, the load of the battery temperature is higher, and so on until after the cooling of its rechargeable battery, charging money for having to wait for the freshness of the battery. After a long time is not re-using, it is preferable to activate the battery to discharge a few times. Usually used in time to pay attention to maintaining the integrity of the wrapping paper, can not be broken in order to prevent short circuits. Do not fight the impact of the battery, do not fire and so on.